Kawai K3 Waveforms For The UDO Super 6

Immerse your UDO SUPER 6 in the retro allure of 33 classic waveforms sampled from the iconic Kawai K3. These 16-bit, 4096-sample waveforms are tailor-made to work directly with your Super 6.

BREATHE K3 LIFE INTO YOUR SUPER 6.

To hear a sound comparison between the K3 and Super 6, listen here.

Follow the steps below to copy the factory waveforms to your Super 6.

For more information please refer to the manual.

1. Ensure there isn't a USB cable connected to the Super 6.

2. To copy files to or manipulate files on the patch disk you must first unlock the patch disk:

- Power off the Super 6 and wait a few seconds.

- Whilst holding down the PATCH button, power on your Super 6 and continue to hold the PATCH button.

- After 5 seconds, release the PATCH button.

3. Connect the Super 6 to your computer using a USB cable. Observe the Super 6's patch disk

(the disk that is approx 5.2 MB in size) appear as a disk drive on your computer.

4. Save the current waveforms onto your computer, and then delete them from the super 6. Then Copy the 'waveforms' from this download to the Super 6's patch disk under waveforms or alternative waveforms (whichever one you emptied). If asked if you want to copy files without their properties choose 'yes'.

5. Power cycle.

All done, enjoy!